Master Builders Victoria (MBV) has expressed concern that the Victorian Government is trying to push through substantial changes to the building code relating to accessible housing and energy efficiency without addressing the concerns of homebuyers and the building and construction industry. The changes also fail to address the issue of affordable housing to all Victorians.

MBV acknowledges that future provisions are needed for people as they age or have a disability to ensure there is sustainable and suitable housing stock into the future. But the benefits will not be realised if the changes are not introduced properly.

Accessible housing

The proposed changes will mean new homes will be required to comply with the National Construction Code (NCC) Livable Housing Design Standard - adding additional costs to the build.

MBV CEO Rebecca Casson said there were concerns that the changes to allow accessible housing may compromise other provisions in the NCC.

“The consequences of not addressing these changes with careful consideration will challenge compliant building work, add further costs to homebuyers, remove homebuyer choice in the design of their homes, and for builders, the added pressure of explaining why these requirements are necessary when they may not be needed,” she said.

“MBV believes that the accessible housing requirements should remain voluntary and not mandated in the 2022 NCC.

“If these changes go ahead, we want to see a clear transitional period where training can be delivered, time for display homes to be built and increased homebuyer options. The Victorian Government also needs to invest time and resources into developing and delivering an effective consumer and industry awareness campaign.

“There also needs to be further consideration of exemptions, possible trial periods to demonstrate the changes in-situ, and consideration of affordability in accommodating these changes.”

Energy efficiency

Ms Casson said the proposed changes would mean all new houses must meet 7-star requirements, meaning a significant impact on building costs.

“The changes will mean higher glazing requirements, increased ceiling and wall insulation, stricter provisions for heating, air-conditioning and hot water systems – all of which will mean home buyers ultimately bear the cost,” she said.

“The Australian Building Codes Board (ABCB) has released proposed energy efficiency changes in the NCC 2022.

“The plan is for Class 1 and 2 buildings to increase from 6 stars to 7 stars under the NatHERS rating scheme, even though the Government’s numbers show that the costs far outweigh the benefits.

“MBV is seeing modelling from researchers in this energy efficiency field showing a significant risk of increased condensation and mould in Australian buildings.”

Ms Casson said mould posed a significant risk to people’s health and well-being.

It produces various toxic and chemical substances, including mycotoxins, beta-glucans, ergosterol and volatile organics, that produce symptoms such as a running or blocked nose, irritation of the eyes and skin, and sometimes wheezing.

It can also cause damage to the building's structure.

Before these changes occur, Ms Casson said the building code must be updated and industry knowledge increased to eliminate this risk.

“This would include identifying particularly risky construction techniques and the correct methods to reduce risk,” she said.

“We believe that the NatHERS assessment pathway needs to be broadened to include a true whole of house rating that includes appliances, lights, and the contribution of onsite renewable energy.

“In this manner, the same outcomes can be achieved without risking health consequences to building occupants, unduly restricting design, or adding unnecessary cost.”

Another area of importance is the subdivision of land and its orientation for future housing. This is critical for houses to ensure solar access to the living areas and solar panels.

Ms Casson said MBV was concerned with the flurry of building code changes related to the building and construction industry.

“On top of COVID-19 and its impacts on businesses, we are seeing supply shortages, price increases of 30-50 per cent in some materials, and upcoming changes in trade registration and licensing,” she said.

“It’s vital that these changes are carefully considered as neither the Government, industry nor consumers wish to experience any unintended consequences like those experienced with cladding.

MEDIA ENQUIRIES:
Andrew Jefferson, Media and Communications Manager, [email protected].